Tamiya TLT-1


The Penguinr/c P2300 Performance Chassis is currently the most advanced lightweight chassis availible for the TLT-1. This chassis improves the stock TLT-1 reducing weight, increasing the ground clearance, lowering CG, increases articulation, improves electronics placement, and reduces drivetrain bind.

Top Bottom
click on picture for larger view

This kit includes everything that you need for conversion, nothing further is required to take advantage of all the features that this chassis provides. However, for those of you that are looking to expand on the capabilities of the TLT-1 this chassis provides an excellent base do to it's sturdy lightweght design and centered middle differential (the Stock TLT-1 has an offset middle differential). Protecting the centered differential is a removable replaceable G10 skid plate to keep your chassis in pristine condition.

Differential Skid Plate
click on picture for larger view

Electronic placement in this chassis is eased by providing an additional Radio tray to mount your electronics while allowing you to mount your normal Sub-C batteries at both the front and the rear of the chassis to aid in balance. (the stock TLT-1 requires a custom battery pack) These special trays are mounted 10mm lower in the chassis than the stock TLT-1 but do not interfere with articulation due to the innovative interlocking construction of the chassis. You have the ability to mount up to 10 Sub-C cells on this chassis. (stacked)

Front Battery Rear Battery
click on picture for larger view

In the effort to improve the articulation of the suspention we have designed a new Servo mount system that places the servo in front of the axle but is still protected fully by the stock bumper cage. This placement of the servo adds over an inch of additional suspension clearance while protecting your valuable electronics. An optional version of this servo mounting can also be used at the rear of the TLT-1 for four wheel steering and is availible separately. (P2308) In addition we have centered the differential in a newly designed gearcase specifically for the P2300.

Servo Mount Gearcase
click on picture for larger view

The P2300 Performance Chassis includes many more features in addition to the ones mentioned above. Below is a list of the features and included parts associated with this chassis.
Parts and Features:
Complete Interlocking Graphite Chassis including:

Left and Right Side Plates, Front and Rear battery/electronics trays, Center Radio Tray (G10 Fiberglass), Front Gearbox Plate, Rear Gearbox Plate, Motor Mount Plate, Spur Shaft Support and Positioning Plate, Removable/Replaceable Center Skid Plate (G10 Fiberglass), Graphite Front Servo Mount Kit.
Full Travel Suspension Capable
Compatable with Sub-C batteries
(10+ cell capable - 5 on trays)
Velcro Battery Retention System
Lowered CG
(Battery Plates are 10mm lower than stock, Motor is 3mm lower)
4oz+ lighter than stock TLT-1.
Increased Rigidity
Centered Differential
Increased Static Ride Height
(34mm ride height)
Fan provision for standard 40mm fan
(additional motor cooling)
All hardware and Directions to complete Conversion
Optional: P2308 P2300/TLT-1 Servo Kit for Rear Steering

Side Veiw

List Price: $129.99
Part Number: P2300

Purchase P2300

P2300 Replacement Parts List:

P2300 Chassis Plate Set
P2300 Radio Tray Kit
P2300 Skid Plate Kit
P2300 Gearbox Set
P2300 Motor Plate Set
P2300 Front Battery Tray Kit
P2300 Rear Battery Tray Kit
P2300/TLT-1 Servo Kit
(front or rear)

P2300 Option Parts List:

P2300 Replacement Skid Plate
P2300/TLT-1 Servo Kit
(front or rear)
P9000 Velcro Strap (x2)

Click on blue $ to add replacement parts to your PayPal web cart.

Click here to Download Direction Manual:

If you have any questions or comments regarding this chassis conversion please feel free to mail us at

2004 Penguinr/c