|
|
production prototype shown, actual production may vary - optional parts shown (P5506tc4, P5507tc4, and P5714) Here is your chance to own the most advanced TC4 chassis currently in production. This chassis is an evolution of the race proven P5500tc3 chassis that dominated the 2004 ROAR region 3 Championships in the hands of Mike Collins taking both Stock and Modified Classes. The Penguinr/c P5500tc4 retains all of the features that made the TC3 version a force on the track but also expands upon them. click on picture for larger view - optional parts shown (P5506tc4, P5507tc4, and P5714) Some of the P5500tc4's advanced features include Left or Right Servo Mounting Locations, Adjustable Flex M2.5 Chassis (via side rail posts), Right Side battery slots for offset battery location, Dual position battery slots (left and right) for additional balance possibilities, center front body post adaptor, M2.5 Graphite Corner Braces with Adjustable Camber Link Plates. The P5500tc4 has several different battery attachment methods which include use the Stock Battery Brace, Velcro Straps screwed to the chassis (optional), or strapping tape. The P5500tc4 has a smooth profile chassis design which keeps the chassis from creating different friction profiles if it should touch the ground during cornering. This keeps a low ride height chassis rub from affecting the handling of the car differently when cornering in opposite directions. click on picture for larger view - optional parts shown (P5506tc4, P5507tc4, and P5714) Options for the P5500tc4 include additional Camber Link Spacer Kit (P5502tc4b) for an infinate number of roll center possibilities, Chassis Stiffening Kit (P5504a) which allows fine tuning of chassis flex for different surfaces, Front and Rear Shock Towers (P5506tc4, P5507tc4 (shown below)) these towers include different setting for optimum shock performance, Nerf Wings (P5508) to protect your rear suspension in the event of impacts, Velcro Battery Strap Kit (P5509a) for easy removal of batteries, and Graphite Front Bumper Brace (P5714) to increase the strength of the fornt foam bumper. click on picture for larger view - optional parts shown (P5506tc4, P5507tc4, and P5714) Included in this kit is the following - M2.5 Quasi Grade Graphite Chassis, M2.5 Quasi Grade Graphite SideBraces(x2), M2.5 Quasi Grade Graphite Corner Braces, M2.5 Quasi Grade Graphite Camber Link Plate Kit, M2.5 Quasi Grade Graphite Camber Link Spacer Kit, M2.5 Center Body Post Adaptor, Aluminum Standoffs, Screws, and Directions required for conversion. |